Sub‐sample time shift and horizontal displacement measurements using phase‐correlation method in time‐lapse seismic          下载免费PDF全文

Gaurav Tomar  Satish C. Singh  Jean‐Paul Montagner 《Geophysical Prospecting》2017,65(2):407-425

Hydrocarbon production and fluid injection affect the level of subsurface stress and physical properties of the subsurface, and can cause reservoir‐related issues, such as compaction and subsidence. Monitoring of oil and gas reservoirs is therefore crucial. Time‐lapse seismic is used to monitor reservoirs and provide evidence of saturation and pressure changes within the reservoir. However, relative to background velocities and reflector depths, the time‐lapse changes in velocity and geomechanical properties are typically small between consecutive surveys. These changes can be measured by using apparent displacement between migrated images obtained from recorded data of multiple time‐lapse surveys. Apparent displacement measurements by using the classical cross‐correlation method are poorly resolved. Here, we propose the use of a phase‐correlation method, which has been developed in satellite imaging for sub‐pixel registration of the images, to overcome the limitations of cross‐correlation. Phase correlation provides both vertical and horizontal displacements with a much better resolution. After testing the method on synthetic data, we apply it to a real dataset from the Norne oil field and show that the phase‐correlation method can indeed provide better resolution.  相似文献   

低纬电离层TEC起伏与相位闪烁的统计特征          下载免费PDF全文

徐良  程洁  徐继生 《地球物理学报》2020,63(1):19-30

穿过电离层不规则体传播后的无线电波,其振幅和相位出现快速随机起伏,即电离层闪烁.为了量化电离层不规则体和相位闪烁的强度,本文提出用TEC起伏δTEC作为特征参量,并用δTEC的标准差构建一种新指数σtec.文中证明指数σtec与相位闪烁指数完全等效.在电离层强闪烁期间,经常出现信号短暂失锁和周跳,导致TEC值突跳和不连续.为此,本文设计了一种周跳检测与校正的批处理算法,用于消除TEC值突跳.在此基础上,利用位于我国中南部电离层闪烁监测台网2012—2015年的观测数据,考察了GPS信号相位闪烁和不规则体的统计特征.结果表明,我国低纬电离层不规则体和相位闪烁与振幅闪烁随地方时和月份变化的特征类似,一天之中主要出现在日落后至黎明前,一年之中,春季不规则体出现最频繁、秋季次之,呈现春秋不对称性,冬夏季出现很少.此外,我们还比较分析了指数S4与σtec的联系,两者之间显著正相关表明,小于第一菲涅尔带尺度的小尺度不规则体和大于第一菲涅尔带尺度的大尺度不规则体一般同时存在.  相似文献   

疏松地表可控震源高频畸变分析及改善方法     

张剑  赵国勇  宋宁宁 《地球物理学进展》2020,(1):250-257

针对可控震源高频拓展,一些使用者只是简单提高高频截止频率,出现了较多问题,如在沙漠、草场等疏松地表区域会出现高频畸变,严重影响了资料品质.为此,从高频段畸变现象入手,建立可控震源与地表振动模型,深入研究了震源振动输出力信号.分析表明高频段重锤与平板加速度之间产生较大相位差,造成可控震源系统过载是产生高频畸变的原因,并进一步提出了高频优化能量补偿扫描技术的方法改善高频畸变,通过试验对比说明了该方法能够提高高频输出信号的稳定性,降低高频畸变,也为以后解决类似问题提供帮助.  相似文献   

复杂地质结构OBS地震剖面震相识别方法   总被引：1，自引：0，他引：1       下载免费PDF全文

庞新明  赵明辉  刘思青  王强  张浩宇  任昱  丘学林 《地球物理学报》2019,62(9):3482-3491

震相识别对获取深部速度结构至关重要.横穿加瓜海脊的T1测线东段,地形高差达3 km,沉积厚度相差约2 km,沉积基底变化复杂,对海底地震仪（OBS）地震剖面的震相识别增加了难度.本文以该测线东段OBS数据为例,采用地形校正、基底校正、多次波识别、正演模拟、走时投影等多种手段,开展了复杂构造的OBS震相识别研究,获得了测线下方深部速度结构模型.结果表明,采用的方法对复杂地质结构下OBS震相识别是行之有效的,相比传统的方法提供了更多且准确的震相走时信息,获得的速度模型更加可靠.  相似文献   

First-break picking for microseismic data based on cascading use of Shearlet and Stockwell transforms     

Yao Cheng  Yue Li  Chao Zhang 《Geophysical Prospecting》2019,67(1):85-96

First-break picking of microseismic data is a significant step in microseismic monitoring. There is a great error in conventional first-break picking methods based on time domain analysis in low signal to noise ratio. S-transform may provide a novel approach, it can extract the time–frequency features of the signal and reduce the picking error because of its high time–frequency resolution and good time–frequency clustering; however, the S-transform is not well suited for microseismic data with high noise. For applications to array data where the weak signal has spatial coherency as well as some distinct temporal characteristics, we propose to combine the shearlet transform with a time–frequency transform. In the proposed method, the shearlet transform is used to capture spatial coherency features of the signal. The information of the signal and noise in shearlet domain is represented by shearlet coefficients. We use the correlation of signal coefficients at adjacent fine scales to give prominence to signal features to accurately discriminate the signal from noise. The prominent signal coefficients make the signal better gathered in time–frequency spectrum of the S-transform. Finally, we can get reliable and accurate first breaks based on the change of energy. The performance of the proposed method was tested on synthetic and field microseismic data. The experimental results indicated that our method is outstanding in terms of both picking precision and adaptability to noise.  相似文献   

秒采样精度下磁暴急始自动拾取方法研究     

李健  周少辉  马媛  李潇  孙三健  李位苏 《中国地震》2020,36(2):341-349

磁暴急始的自动识别拾取与磁暴报告自动产出是国家地磁台网数据产品产出中重要的内容。为实现在1s采样率下的磁暴急始高精度拾取,本文针对性地提出基于Walsh变换和Akaike信息准则(AIC)的起跳点检测算法——Walsh-AIC算法,将其应用于98个磁暴急始事件的拾取上,并采用由国际地磁指数服务(ISGI)发布的磁暴时刻为标准对应用效果进行评估。结果表明,该算法不仅能够将急始磁暴起跳时刻的位置更加明显地刻画出来,而且能够有效避免传统识别急始磁暴的AIC算法中存在的识别起跳时刻结果晚于实际起跳时刻的情况。同时,将Walsh-AIC算法与其他主流拾取方法进行对比,发现前者定位结果的平均偏差和标准差均明显小于其他算法。此外,Walsh-AIC算法结果的误差关于0点的对称性较好,表明该算法拾取磁暴急始起跳时刻的精度较高,适合于解决磁暴急始的自动拾取问题。  相似文献   

基于SRTM DEM的InSAR高分辨率山区地表高程重建算法   总被引：1，自引：0，他引：1       下载免费PDF全文

吴宏安 《遥感学报》2009,13(1)

山体的叠掩和阴影现象造成的信号去相关,一直是InSAR重建山区地表高程的瓶颈之一.为此,提出了一种新的基于粗分辨率SRTM DEM(约90m分辨率)辅助InSAR数据重建山区地表高程的方法.利用SRTM DEM模拟的干涉相位,对ERS-1/2干涉相位做去地形相位处理,得到残余相位.通过对解缠后的残余相位计算方差提取叠掩和阴影区域的噪声,并用平均相位近似恢复噪声区域的相位,然后将其转换为高程,并用SRTM DEM作高程补偿处理,从而实现地表高程重建.最后,定量比较了该方法与传统InSAR技术生成的DEM精度.实验表明,这种方法能有效提高传统InSAR技术生成地表高程的精度,这对提高星载雷达数据的使用效率具有重要意义.  相似文献